GeoSpring

Electric Heat Pump Water Heater

Pull savings out of thin air! With advanced heat pump technology combined with traditional electric elements, this new GeoSpring hybrid electric heat pump water heater has been designed with maximum energy efficiency in mind. In fact, it's the most energy efficient 50-gallon electric water heater you can buy.

To create the next generation of water heaters, GE rethought every aspect of this appliance from the ground up. The result is an innovative new product that can reduce water heater operating cost up to 62% and save $320 per year.* That adds up to significant savings, and you won't have to give up a single drop of hot water.

*Based on DOE test procedure and comparison of a 50-gallon standard electric tank water heater using 4879 kWh per year vs. the GeoSpring hybrid heat pump water heater using 1856 kWh per year.

Click for a full .pdf brochure

Cut water heating energy usage by up to 62%

The energy efficient GE hybrid water heater exceeds 2010 ENERGY STAR standards with an energy factor rating (EF) of 2.35 (in Hybrid mode). The energy factor indicates a water heater's overall energy efficiency based on the amount of hot water produced per unit of fuel consumed over a typical day. The higher the energy factor, the more efficient the water heater will be. A standard electric water heater has a EF of 0.88.

That means a GE electric heat pump water heater:

• Saves approximately $320* per year–that's $3,200 savings in energy costs over a 10-year period
• Uses less than half the energy compared to a conventional 50-gallon tank water heater
• Operates at 550 watts in eHeat™ mode vs. 4,500 watts in standard electric mode
• Exceeds ENERGY STAR requirement of 2.0 Energy Factor (EF) with a rating of 2.35 EF (in Hybrid mode)

How does it work?

The tank portion of this ENERGY STAR® qualified electric water heater includes two electric heating elements, a pressure relief valve, an internal porcelain-lined tank and an anode rod. But what truly sets this product apart is just above the tank.

How does it work? A compressor and evaporator are integrated into the electric water heater unit and the evaporator draws in ambient heat from surrounding air using two variable speed fans. Condenser coils wrap the tank all the way to the bottom to transfer this heat into the tank and heat the water. This innovative process creates the same amount of hot water as a traditional electric water heater.

Easy-to-use control panel

The GeoSpring electric heat pump water heater is the first residential electric water heater with an electronic back-lit LCD display. The panel features a user-friendly control system located at eye-level to eliminate the need to bend down to the floor to adjust temperature settings. Changing the mode and temperature is as easy as following the on-screen menu. This easy-to-use electronic control panel offers both simplicity and flexibility, giving consumers as much or as little control as they like.

eHeat™ mode

Maximize your savings. In this mode, the water heater only operates the heat pump to heat the water. This is the most efficient mode, and allows for the greatest amount of savings.

Hybrid mode

Use less energy while still experiencing fast recovery times. While the unit uses the heat pump as its primary means to heat the water, the standard electric elements may activate if a faster water temperature recovery time is needed. When the system determines that demand has been met, it will automatically revert back to using the heat pump only. This is the default mode the electric water heater is shipped in.

High Demand mode

This is a great feature if you have guests spending the weekend and need increased amounts of hot water. High Demand mode operates very similar to Hybrid mode, but lets the system know in advance that it will be experiencing a larger water demand than usual. The water heater will be faster to react to temperature recovery by cycling on the heating elements sooner and for a longer duration of time.

Standard mode

This mode shuts off the heat pump and only uses the electric elements to heat the water, just like a standard electric water heater. Standard mode allows for operation in extremely cold situations (less than 45°F) where heat pump functionality would not be ideal.

Vacation setting

With this setting, the system will drop the temperature set point to 50°F to save energy, while also preventing the water from freezing. Simply set how many days you will be away, with a minimum of 3 and a maximum of 90. The unit automatically heats the water to the previous set temperature the day before you are expected to return. Now you can experience a hot shower the moment you return home.

Air Filter

In the Hybrid, eHeat and High Demand modes, the water heater moves air through the system and out the back of the unit. An air filter is in place to protect the evaporator from accumulating dirt and dust. A clean air filter is important to get the highest efficiency. When the filter requires cleaning, a red indicator light above the "Filter" button will become illuminated, and an audible beep will sound. The filter can be wiped clean with a damp rag or rinsed with warm water.

Sound

The GeoSpring Hybrid heat pump water heater produces sound during heat pump operation due to the operation of the evaporator fans. This may be different from a standard electric water heater which may not make sound. The GeoSpring sound is rated an average 58 dBa, which is similar to the sound of a microwave vent fan. The sound is not constant and only occurs when the water heater is recovering.

Find us on facebook!

All prices are in Canadian dollars and are subject to change without notice. Prices may be applicable to state/provincial taxes. Shipping/freight charges may apply.