Pro Star Mechanical

Serving Vancouver Island & the Gulf Islands

Pro Star Mechanical Technologies Ltd.

Heating | Plumbing | Radiant Floor Heating | Air Conditioning | Heat Pumps | Geothermal Heat Pumps | HVAC | Boilers

Victoria, BC: 250-383-4558 | Courtenay, BC: 250-331-0888


Argo's AT Series Electric Boiler

AT Series Electric Boilers
Absolute Efficiency - Total Comfort!

  • 100% Fuel Efficient
  • 2 or 4 Element Boiler Available from 6kw to 24kw
  • Available as a 2 piece modular to support up to 40kw
  • Power Block or Integral Circuit Breakers for Maximum Installation Flexibility
  • Proven One-Piece Cast Iron Heat Exchanger

Absolute Efficiency - Total Comfort

Not only is the new Argo "AT" Series Electric Boiler 100% efficient, with operating temperatures from 90°F to 180°F, it's ideal for both low temperature radiant systems and standard hydronic heating in both residential and commercial applications.

Jump to "AT" Series Electric Boiler Specifications & Prices

The Advantages of the Argo "AT" Series Boiler

2 or 4 Element Configuration & Modular Boiler Configuration
Designed for maximum versatility the boiler features a 2 element boiler (6kw to 12kw) and a 4 element boiler (12kw to 24kw). The Argo "AT" series boiler can also increase its' capacity to 40kw by "stacking" two boilers together in a Modular Boiler Configuration. (Please contact the office for specs on the 4 element or modular configuration).
Circuit Breaker Load Center or Power Block
The "AT" Series is offered with a Circuit Breaker Load Center or Power Block. The Circuit Breaker Load Center incorporates an electrical protection system of factory-installed circuit breakers to protect each element and provide the added installation flexibility required to meet or exceed local codes.
Microprocessor Based Control Board
The "AT" features an advanced Microprocessor Control which safely and efficiently controls the elements. Elements energize individually, with additional elements energizing as needed depending on demand. The start-up element is rotated so run time is balanced across all elements promoting longevity. The "AT" Series boiler utilizes a sensor connected to a probe in a an immersion well to determine demand. This configuration relays water temperature back to the control board allowing the unit to efficiently maintain steady, even heat using only the elements necessary to satisfy demand. Thus the "AT" Boiler avoids the constant peaks and valleys experienced by others relying on a timer system resulting in short-cycling of the elements that wastes energy and costs the user more in electricity.
Reliability
The Argo "AT" Series Electric Boiler features a one piece cast iron heat exchanged and a 20 Year Heat Exchanger Warranty.

The Argo "AT" Series features

  • Diagnostic Indicator Lights
  • 30 Second Pre-Purge
  • Adjustable Temperature Set Point and Differential
  • Factory installed Circulator Relay
  • On Board Power for an External System Circulator
  • Compact Cabinet Size
  • Safety Features include: Operating Limits with Back-Up, Redundant Relays per Element & Audible Alarms/Fault Codes
  • Optional Components: Low Water Cut Off & Flow Switch are available

Standard Equipment Included with the Argo "AT" Series Electric Boiler:

  • Painted Steel Jacket
  • Mounting Brackets
  • Neon Indicator Lights
  • Safety Limit Control (High Limit - Fixed Temp.)
  • Gasket
  • Heating Element
  • Control Board
  • RTD Sensor
  • Neutral Terminal Block
  • Ground Connection Lug
  • Relief Valve - 30 psi
  • Temperature/Pressure Gauge
  • Cast Iron Heat Exchanger 2 or 4 element
  • Control Panel Assembly 2 or 4 element

Electric Boilers w/Breakers Include:

  • Circuit Breaker 15A - 1 Pole
  • Circuit Breaker 40A - 2 Pole
  • Load Center Assembly

Electric Boilers w/Power Block Include:

  • Fuse Block
  • 10 am Ceramic Fuse
  • Power Distribution Block

 

Argo "AT" Series Electric Boiler Specifications

 
AT0623
AT0824
AT1025
AT1226
AT1644
AT2045
AT2446
# Elements
2
2
2
2
4
4
4
Approx. Dimensions (D x W x L)
9" x 18.6" x 16.5"
Approx. Shipping Weight
62 lbs
Inlet/Outlet Size
1-1/4" NPT
Min. Flow Rate (GPM)
2.0
2.7
3.4
4.1
5.5
6.8
8.2
Boiler Size Nominal (kW)
6
8
10
12
16
20
24
Approx BTUs
20,460
27,280
34,100
54,560
54,592
68,240
81,888
Operating Voltage (AC)
240
240
240
240
240
240
240
Total Heating Element Amps
25.0
33.3
41.7
50.0
66.7
83.3
100.0
Element Size (Watts)
3,000
4,000
5,000
6,000
16,000
20,000
24,000
Max. Amperage/Leg*
31.0
39.3
47.7
56.0
72.7
89.3
106.00
Suggested Wire Size (AWG)^**
8
6
6
4
3
2
1
Suggested Breaker (Amps)**
40
50
60
70
90
100
125
Price in Canadian Funds
$1,460.00
$1,500.00
$1,550.00
$1,595.00
$2,200.00
$2,246.00
$2,384.00

*Allows for 6A control & accessory load in addition to heat load
^ Type "THW" wire, copper only, check local codes
**Actual wire and breakers need to be sized based on specific installation requirements in accordance with local and national codes
Back To Top
E-mail Pro Star

Pro Star Victoria Head Office
524 William Street
Victoria, BC V9A 3Y9
Phone: 250-383-4558
Fax: 250-383-6990

 Vancouver Island BBB
Pro Star Courtenay Branch
Unit 212 - 2459 Cousins Avenue
Courtenay, BC V9N 3N6
Phone: 250-331-0888
Fax: 250-331-0889

E-mail: info@prostar-mechanical.com

All prices are in Canadian dollars and are subject to change without notice. Prices may be applicable to state/provincial taxes. Shipping/freight charges may apply.
Copyright © 2009 Pro Star Mechanical Technologies Ltd
E-mail our webmistress.